Datamars R-IN1300 MID Hızlı Başlangıç Kılavuzu - Sayfa 3

Kart Okuyucu Datamars R-IN1300 MID için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Datamars R-IN1300 MID 6 sayfaları. Hf – multi read

2. Commands
All commands must be followed by a carriage return (ENTER).
Main Command/settings Function
*d
*i
*x
*se
*rd
*sa1
*lc2
B. Ethernet
1. Configure your LAN Internet Protocol entering the following IP address (possibly in the
Alternate Configuration): 192.168.0.1
2. Open a web browser (Internet Explorer, Firefox, etc.) and type http://192.168.0.85 (or the IP
that you have configured) in the address bar. The login-page of the reader authorizes the access
to the configuration-, monitoring- and administrator- tools.
The default accounts are defined as follows, passwords can be changed.
User:
Password:
3. The monitor tab is used to verify whether the reader is activated or not.
The "Start Reader" button makes the reader start its inventory cycles.
The "Stop Reader" button makes the reader suspend its reading process.
The "Start Monitoring" button permits to display the UIDs of the chips found by the reader.
The "Clear Result" button clears the UIDs display.
The "Stop Monitoring" button stops the display.
The led "D" (detection) is green if the reader sends UIDs, red otherwise
R-IN1300 MID – UM001061 – v.3.0 – January 2019
Detect: returns the UID-list of all the HF transponders in the field
Interrupts any continuous mode operation
List of the commands and settings
Settings: Displays the current settings
Restore default settings
Standalone mode on
Lock-code on
user1
1234
2 (5)