Datamaster T0046 Kullanıcı Kılavuzu - Sayfa 5

Ağ Kablosu Datamaster T0046 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Datamaster T0046 19 sayfaları. Professional lan cable tester

Datamaster

T0046 Professional LAN Cable Tester – User Guide

The Datamaster

Professional LAN Cable Tester is suitable for use with UTP (unshielded)

and STP (shielded) Cat-5, Cat-5E, Cat-6, Cat-6A and also with Coaxial cables. The Loopback

and Remote operating modes indicate cable continuity, wiring configuration (and type of fault)

and the type of cable being tested. TDR (Time Domain Reflectometer) technology is used to

measure cable lengths between a range of 1 to 350 metres. TDR is also used to indicate the

distance to a short or open circuit.

Auto-off mode (except in TONE MODE) prolongs battery life. A low-battery condition is

displayed when it is time to change the battery. The backlit LCD screen has four lines of 16

characters. A Tone mode is provided for F-Set probe fault location or identification. There are

24 memory locations for storing test results.

It is supplied with

belt clip, black zippered vinyl pouch, 2 x F-type to BNC coax adaptors, 2 x 8P to

6P modular reducers and a 9V battery.

INTERFACES AND CONTROLS

8P8C Loopback Jack

Coaxial F-Connector

8P8C Main Jack

Remote Terminator storage

4 line, 16 character LED screen with

menu-selectable backlighting

Power switch

Mode Selection buttons:

LAN

TEL

COAX

TONE

LENGTH

Setup menu button

Memory button

Test / Enter button

Navigation keys

Battery compartment (on rear)

Page 1