Datamax Apex 3 Hızlı Başlangıç Kılavuzu - Sayfa 4
Yazıcı Datamax Apex 3 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Datamax Apex 3 4 sayfaları. Portable thermal receipt printer
Ayrıca Datamax Apex 3 için: Teknik Özellikler (4 sayfalar), Teknik Özellikler (4 sayfalar)
Status Indicator LEDs
Press the ON/OFF button to turn the printer on. Three LED indicators, located on the
top of the printer, indicate various printer functions. The LED will indicate the function
as described below
L
E
D
LED #1
Communication
LED #2
Battery
LED #3
Magnetic Card
Reader & Printer Error
LED #1
Performing Self-Test
1. The printer myst be OFF.
2. Press and Hold the Paper Feed Button.
3. While holding the Paper Feed Button, press the ON/OFF Button.
Communication: All printers ship in RS232 and Bluetooth™ mode.
IrDA and 802.11g are optional features. Refer to the User Guide for
set-up instructions.
Copyright © 2015, Datamax-O'Neil. All rights reserved. Revised 02.11.2015
C
l o
r o
S
a t
Flashing
Green
Steady
Flashing
Blue
Steady
Flashing
Blue
Steady
Red
Steady
Amber
Steady
Green
Steady
Steady
Red
Flashing
LED #2
LED #3
e t
Power is ON and the printer is in RS232 or IRDA
mode
Communicating with host
Power is ON and the printer is in Bluetooth mode
Transmitting/Receiving
Power is ON and the printer is in 802.11b/g mode
Transmitting/Receiving
Low power indication
Battery being charged. The LED
will turn off when the battery
is fully charged
• Indicates that MCR is ready to accept data
• Indicates that SCR is ready to accept data
• MCR track read error
• Printhead is hot [at +80°C (176°F)}
• Battery voltage dropped below
a threshold (6.25 VDC under load)
• Out of paper
• Paper door is open
D
e
s
c
i r
t p
o i
n