Datamax H-Class Manuel - Sayfa 9

Etiket makinesi Datamax H-Class için çevrimiçi göz atın veya pdf Manuel indirin. Datamax H-Class 12 sayfaları. Cutter option
Ayrıca Datamax H-Class için: Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar), Manuel (14 sayfalar), Manuel (10 sayfalar)

Datamax H-Class Manuel
3) Remove the four Cover Screws and two
Rear Shields from the Cutter
Assembly.
4) Remove the Cover from the Mechanism
and then, using compressed air (or a
brush), remove all debris.
5) Pressing on the Lever to gain access
and using a Cotton Swab dampened
with alcohol (see note below), wipe clean
the Fixed Blade, the Movable Blade,
and the other areas where adhesive has
accumulated.
 Note: Heavy deposits can be removed using WD-40
remover) if carefully and sparingly applied using a cotton swab. Never spray directly onto
the assembly; severe damage can result.
Cutter Assembly
Cover
Fixed
Blade
Movable
Blade
(or another non-damaging adhesive
7
Cover Screws
Rear Shields
(Cabling not shown for clarity.)
Mechanism
Cotton Swab
Lever