Datamax M-Class Mark II Manuel - Sayfa 3

Etiket makinesi Datamax M-Class Mark II için çevrimiçi göz atın veya pdf Manuel indirin. Datamax M-Class Mark II 10 sayfaları. Rfid option
Ayrıca Datamax M-Class Mark II için: Manuel (6 sayfalar), Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

Contents of the Peel & Present Kit

This kit contains the following items:

Peel and Present Mechanism

Assist Roller and Bushing

NOTE: If this option was ordered with the printer the Assist

Roller and Bushing will already be installed in the printer.

Proceed to Step 3: Installing the Peel & Present Mechanism.

Otherwise follow the steps below to install these items into

the printer.

Other Requirements

This option requires the Internal Rewinder option. Contact your sales representative for more information.

To install this option you will need a #2 Flathead and a #2 Phillips head screwdriver.

 Turn 'Off' the power switch and unplug the

printer.

 Open the cover. Press in Latch and raise the

Printhead Mechanism.

 Remove any media from the printer.

 Remove the Fascia by gently pulling it

forward.

 Loosen and remove the Thumbscrew, then

remove the Tear Plate.

Tear Plate

Fascia

Printhead Mechanism

Latch

Thumbscrew