Datamax M-Class Mark II Manuel - Sayfa 8

Etiket makinesi Datamax M-Class Mark II için çevrimiçi göz atın veya pdf Manuel indirin. Datamax M-Class Mark II 10 sayfaları. Rfid option
Ayrıca Datamax M-Class Mark II için: Manuel (6 sayfalar), Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)

 Route the Backing Material under the Assist Roller and around the Internal Rewinder, as shown

below.

Backing Material

Assist Roller

 Note: The Media Retainer can be used in place of the Media Clip for a more consistent rewound roll. The Media

Clip and Media Retainer cannot be used together.

 Put the leading edge of the Media into a Slot on the Internal Rewinder and insert the Media Clip. Be

sure the leading edge of the Media is cut square and that is inserted evenly into the slot.

 Manually rotate the Internal Rewinder to remove slack from the Media.

 Plug in and turn 'On" the printer. After initialization, press the FEED Button to align the next label to

the top of form position. (If a peeled label is presented, remove it to proceed.) The printer is now ready

for on-demand use.

Internal Rewinder

Backing Material

Slots

Media Clip

Retainer

Thumbscrew