2easy DT-597 Manuel - Sayfa 9
İnterkom sistemi 2easy DT-597 için çevrimiçi göz atın veya pdf Manuel indirin. 2easy DT-597 13 sayfaları. Door station 2-wire series
Sayfayı Yazdır
Door Station DIP Switches
2 x DIP switches used to set the address of
door station if more than one connected into
the system
Door station DIP switches setting
Settings can be done either before or after installation
DIP state
ON
1 2
ON
1 2
ON
1 2
ON
1 2
Video monitor DIP switches settings for Multiple Monitor system
(Models Cronus, Leda)
There are 6 x DIP switches on the rear of video monitor and they are used to configure the
'User Code' for each monitor. Use Tables on the next page for programming monitor 'User
Codes'. DIP switch 6 is 'End of Line' switch, which has to be set 'On' on all monitors connected
via 'Star' with DBC-4 distributor.
If monitors connected via 'Daisy chain', set DIP switch 6 'On' on the last monitor in the chain
only.
DIP state
ON
1 2 3 4 5
-9-
Default setting, ID = 0(00), set to the first Door Station
ID = 1(10), set to the second Door Station
ID = 2(01), set to the third Door Station
ID = 3(11), set to the fourth Door Station
Setting
Monitor not at
the end of line
6
Description
DIP state
Monitor is at the end
ON
of the line
1 2 3 4 5
6
ON(1)
OFF(0)
O N
O N
=
=
Setting