Dataplot EMBLEM EASY Airpress standard Kullanım Kılavuzu - Sayfa 10

Elektrikli Alet Dataplot EMBLEM EASY Airpress standard için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dataplot EMBLEM EASY Airpress standard 20 sayfaları. Pneumatic eyepress

Sayfayı Yazdır
To have an even cutting, the puncher (located on the setting die "D",
must be able to enter softly on the bottom die (see Fig. 11).
We need to follow these steps:
1
) Machine should be as in Fig. 12.
st
2
) Manually lower the safety protection "P" with the black plastic knob
nd
without releasing it when it has reached the end of the stroke.
3
) Holding down the knob, shut the air inlet valve "F".
rd
4
) Loosen the set screw "a" (see Fig. 13) of the bottom die "E" from the
th
right hand side of the machine until the die can turn freely.
Page - 10 -
(D)
(E)
(A)
Fig. 14
Puncher
Fig. 11
Fig. 12
Fig. 13
(F)