Dataprobe iBoot-DC Hızlı Başlangıç Kılavuzu - Sayfa 2

Anahtar Dataprobe iBoot-DC için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dataprobe iBoot-DC 2 sayfaları.

Changing the IP Address

1. Device

Management

Management Utility (DMU) from Dataprobe's website at

dataprobe.com/support/iboot.

means to find and configure your iBoot-DC for use.

discover all the iBoots on your network, display the current IP

address of each, and allow setting of any valid IP address.

Note:

The IP address can only be set within the first two

minutes of powering up the iBoot. The Setup Utility will only

work with iBoots on the same local subnets as the PC.

The iBoot-DC Setup Utility can also be used to return an iBoot-

DC to its Factory Default condition. This can be used to recover

an iBoot-DC with a lost password. Highlight an iBoot-DC from

the display and click Factory Defaults. This must also be done

within the first two minutes of powering up the iBoot.

Complete instructions for the DMU are provided with the

download, and in the full iBoot-DC Manual.

2. Web Page Setup

then Network. Enter the new IP Address, Subnet Mask and

Gateway, then click Save. Click the Reboot button (or press the

reset button next to the power outlet LED) to restart the iBoot-

DC with the new settings.

3. DHCP

From the Home page, click on Setup, then Network.

Change the IP Mode from Static to DHCP. Click Save, then

Reboot. The iBoot-DC will obtain its network settings from the

server. Check the server, or use the Device Management Utility

to obtain the new settings.

Mounting Options

iBoot-DC+ is suitable for desktop or shelf mounting. A mounting kit for

wall and DIN rail mounting is available. Order part:

1920034

Mounting Kit for iBoot-G2 Series

Utility

Obtain

the

The DMU provides the easiest

From the home page, click on Setup,

Device

It can

Fig. 5 Device Management Utility

Fig. 6 Network Setup Page

1920033 Mounting Kit

iBoot G2 Series