Dataprobe COE-8I Donanım Kurulumu - Sayfa 6
Ağ Donanımı Dataprobe COE-8I için çevrimiçi göz atın veya pdf Donanım Kurulumu indirin. Dataprobe COE-8I 7 sayfaları. Contact closure over ethernet
COE-8
SNMP
The COE-8 can be monitored and configured via SNMP managers. Download the MIB at
http://dataprobe.com/files/mibs/coe8.mib
Enter the IP addresses of up to 4 SNMP managers. Enable or Disable SNMP with the checkbox
provided. Traps can be sent every time there is a change of state on any COE-8 channel. Check the
box provided to enable this. If both the COE-8I and COE-8O are configured to send traps, two
messages will be received by each SNMP manager for each event.
Passwords
Two username and password sets allow for two types of users:
User Type
Administrator
General User
Click Apply to save the new usernames and passwords.
Default Username / Password
admin / admin
user / user
Access
Full view and setup
View status only
Page 6