ADE KE 874 Kullanım Kılavuzu - Sayfa 2

Terazi ADE KE 874 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE KE 874 2 sayfaları. Model denise
Ayrıca ADE KE 874 için: Kullanım Kılavuzu (12 sayfalar)

ADE KE 874 Kullanım Kılavuzu
Thank you for your decision to purchase this high quality product of ADE Germany. You
bought a scale featuring highest technical standard and well-proven quality.
Please read this instruction manual prior to the start-up and keep it careful to have this
information on hand whenever needed.
1.
Preparation for use
Activate / Replace batteries:
Open the battery cover at the bottom side of the scale and
remove the battery safety strip. Please ensure the correct polarity
of the battery (+/-).
To replace battery open the battery cover and move the battery at the recess
downwards and the battery will be easy to take out. Make sure that you do not bend the
contact. Insert the new battery (1 x CR 2032) and close the battery cover.
Safety guideline s:
Please care that no heavy object may fall on the scale.
Otherwise, the scale may become damage.
Clean the scale only by using a slightly damp cloth. Do not use
solvents or abrasive cleaning agents. Do not submerge the scale
under water. All plastic parts of the scale should been cleaned
immediately after contact with fat, spices, vinegar and other
heavily spiced or coloured food. Avoid contact with citric acid.
2. Handling
Switch-on the sca le:
Place the scale on a flat surface. Switch-on the scale by pushing the
first, the LCD display will show "88888" and after the scale levelled-off, the indication will
be "0 g" or "0: 0.0 lb:oz" according to the setting. Now the scale is ready to use.
Units of weight:
By pushing the g/oz-button it is possible to change the unit of weight for country specific
setting (g = gram / lb:oz = pound ounce). Please pay attention to use the scale under
consideration of your country specific unit of weight.
|TARE-button. At
2
Tare-func tion:
Use the
|TARE-button to set the scale to "0". Place for example a bowl on the weighing
platform. Upon the weight is indicated push the
again to zero. This process is repeatable until the max. capacity of the scale (5 kg) has
been reached. After removal of the loading, the display indicates the total weight as
negative reading.
Automatic - / manua l switch-off the sca le:
If the indicated weight does not change within approx. two minutes, the scale will
automatically switch-off. To save the battery you can switch-off the scale manually by
pushing the
|TARE-button for about 2 seconds.
3. Error Messages
"Lo"
=
Battery is used up - Please replace the battery with the intended
type (1 x CR 2032).
"-----"
=
Overload - The weight exceeds the maximum capacity of the scale
(5 kg). Please immediately remove the critical load to avoid load
cell damage.
4. Technical Data
Capacity x graduation: max. 5 kg x 1 g
Dimensions:
210 mm x 150 mm x 12 mm
Batteries:
1 x CR 2032 (included)
Subject to technical modifications
5. Warranty
ADE warrants for a period of 2 years from the date of purchase that it will
remedy any defects due to faulty material or workmanship free of charge by
repair or replacement. When purchasing, please have the warranty coupon signed
and stamped by the dealer. When making a guarantee claim, please return the
scale together with the guarantee card including the reason of complaint to your
dealer.
CE Declaration of Conformity
This device features radio interference suppression
in compliance with valid EC Regulation 2014/30
Note: The displayed value may be adversely affected under extreme electromagnetic
influences, e.g. when using a radio unit in the immediate vicinity of the device. Once the
|TARE-button to set the indication
3