Dataprobe iPIO-8 Hızlı Başlangıç Kılavuzu

I/O Sistemleri Dataprobe iPIO-8 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dataprobe iPIO-8 2 sayfaları. Ethernet i/o monitor and control
Ayrıca Dataprobe iPIO-8 için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Manuel (15 sayfalar)

Sayfayı Yazdır
Download the complete iPIO-8 Installation and Operation manual as well as the latest firmware and any
utilities at:
http://dataprobe.com/ipio8-web-relay-control.html?Support
Overview
The iPIO-8 is a network attached, IP addressed digital input and output device. The iPIO-8 can be
controlled and monitored with a standard web browser. Multiple iPIO-8 devices can communicate
amongst themselves to transport I/O information across the network. Each iPIO-8 has eight controllable
form C relays, and eight digital inputs.
Hardware Installation
Inputs
Connect the inputs to the iPIO-8 using the removable
screw terminals. Connect only dry contact closures; relay
or switch contacts. Connect one leg to the G terminal and
the other to the + terminal.
For information on connecting wet contacts, consult the
complete manual before making any connections.
Relays
Connect to the iPIO-8 relays using the removable screw
terminals. Relays are Form C. Connect to the Common
(C), Normally Closed (NC) and Normally Open (NO) as
marked. When the iPIO-8 relay is in the Open Condition,
the Common is connected to the Normally Open. In the
Closed state, the Common and Normally Closed are
connected.
Relay Specifications
Rating (resistive)
Maximum Carrying Current
Maximum Switching Power
Maximum Switching Voltage
Maximum Switching Current
Life Expectancy
0.5 A 120 VAC or 1 A 24 VDC
2 A
60 AV, 24 W
120 VAC/60 VDC
1A
5 Million Operations Mechanical.
100K Operations at rated load
Technical Support:
Ethernet I/O Monitor and Control
Quick Start Guide
201-934-5111
Main:
201-934-9944
iPIO-8
Website: dataprobe.com