AGRI-COVER Lomax Stance Kurulum Talimatları Kılavuzu - Sayfa 5

Otomobil Aksesuarları AGRI-COVER Lomax Stance için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. AGRI-COVER Lomax Stance 13 sayfaları.

Sayfayı Yazdır

2. INSTALLING COVER

A. At front of box, carefully place header

panel on side rails.

B. Hold cover's rear edge 1" above side rails

and slide forward, then lower into retainment

brackets.

C. With cover in horizontal position, center

on side rails, then slide front tabs fully under

side rails and torque to 20 ft-lbs.

D. Close cover to ensure tailgate closes

properly.

IMPORTANT: Always ensure hooks and

latches fully engage side rails.

NOTE: Refer to TROUBLESHOOTING

section if adjustments are needed.

E. Fold cover open to horizontal position and

hook bungee to storage bracket on each side.

F. Release final latch and carefully tilt cover

into storage bracket grooves for vertical

position, then secure safety straps to side rails.

IMPORTANT: Always ensure safety straps

are attached to cover and side rails.

NOTE: Use caution if resting cover on cab

during install.

Latch

Groove in

storage bracket

Safety strap

carabiner attached

to side rail

Retainment

Side rail

Front tab

Bungee hooked to

storage bracket

bracket