AGRI-COVER Outlander Kurulum Talimatları Kılavuzu - Sayfa 4

Otomobil Aksesuarları AGRI-COVER Outlander için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. AGRI-COVER Outlander 12 sayfaları.

3: INSTALLING FRAME (Continued)

C. Install second clamp as close to tailgate as possible, turn bolt finger tight.

D. If provided, install third clamp at midway point, turn bolt finger tight.

IMPORTANT: Ensure all clamp teeth engage side rail grooves.

Bolt

Clamp

NOTE: For vehicles with utility track, remove lower half of standard clamp

and replace with utility track clamp. Insert into utility track for clamping.

E. Repeat Step 3B-D to install clamps on opposite side.

Standard clamp

Utility track clamp

4: INSTALLING SOFT TOP

A. Ensure bulkhead is clean, wipe top surface with alcohol pad (if needed

wash and dry surface first).

Bulkhead

NOTE: Bulkhead depth may vary. Locate narrowest point to align bulkhead

seal during application.

B. Peel protective backing as you go, align bulkhead seal at one corner

across box to opposite corner and cut to length.

C. Firmly press on adhesive along seal.

NOTE: With a spray-in bed liner, better adhesion is possible by smoothing

surface and applying an adhesion promoter.