Dux DUXHLS65 Kullanıcı Kılavuzu - Sayfa 9
Klima Dux DUXHLS65 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dux DUXHLS65 20 sayfaları. 7.2kw inverter split-type room air conditioner
Sayfayı Yazdır
User Manual – Dux Comfort (7.2kW)
Airflow direction control
Range
Vertical
louver
(three places)
Range
OPERATING INSTRUCTIONS
Adjust the air flow direction properly otherwise, it
might cause discomfort or cause uneven room
temperatures.
Adjust the horizontal louver using the remote
controller.
Adjust the vertical louver manually.
To set the vertical air flow (Up-Down) direction
Perform this function while the unit is in operation.
Use the remote controller to adjust the air flow
direction. The horizontal louver can be moved at
a range of 6 for each press, or swing up and down
O
automatically. Please refer to the "REMOTE
CONTROLLER OPERATION MANUAL" for details.
To set the horizontal air flow direction (left - right)
Move the vertical louver manually to adjust the air flow
in the direction you prefer.
IMPORTANT: Before adjusting the vertical louvers, the
supply power must be disconnected.
For some models, the vertical louver can be adjusted
by using the remote controller. Please refer to the
"REMOTE CONTROLLER OPERATION MANUAL"
for details.
Do not operate the air conditioner for long periods with
the air flow direction set downward in cooling or
dehumidifying mode. Condensation may occur on
the surface of the horizontal louver causing
moisture to drop on to the floor or furnishings.
Do not move the horizontal louver manually unless it is
necessary. Always use the remote controller.
When the air conditioner is started immediately after it
was stopped, the horizontal louver might not move for
approximately 10 seconds.
Open angle of the horizontal louver should not be set
too small, as COOLING or HEATING performance may
be impaired due to too restricted air flow area.
Do not operate unit with horizontal louver in closed
position.
When the air conditioner is connected to power (initial
power), the horizontal louver may generate a sound for
10 seconds, this is a normal operation.
8
CAUTION