2easy DT594 Manuel - Sayfa 9
İnterkom sistemi 2easy DT594 için çevrimiçi göz atın veya pdf Manuel indirin. 2easy DT594 13 sayfaları. 2-wire door station
Ayrıca 2easy DT594 için: Kullanıcı Kılavuzu (12 sayfalar)
Sayfayı Yazdır
Door Station DIP Switches
2 x DIP switches can be found on the right
side if fascia of door station removed. Used
to set the address of the door station if more
then one connected
Door Station DIP switches setting
Settings can be done either before or after installation
DIP state
ON
1 2
ON
1 2
ON
1 2
ON
1 2
Video monitor DIP switches settings for Multiple Monitor system
connected via Star (Models Cronus, Leda)
There are 6 DIP switches on the rear of Video Monitor and they are used to
configure the User Code for each monitor. Use Tables on page 10 for
programming monitor User Codes. DIP swith 6 is End of Line switch, which
has to be set 'On' on all monitors connected via Star with DBC4A
DIP state
Setting
Monitor not at
ON
the end of line
1 2 3 4 5
6
Default setting, ID = 0(00), set to the first Door Station
ID = 1(10), set to the second Door Station
ID = 2(01), set to the third Door Station
ID = 3(11), set to the fourth Door Station
DIP state
ON
1 2 3 4 5
6
O N
Descriptions
Setting
Monitor is at the end
of the line
ON(1)
OFF(0)
O N
=
=
-9-