FriendlyARM NanoPi NEO Plus2 Manuel

Anakart FriendlyARM NanoPi NEO Plus2 için çevrimiçi göz atın veya pdf Manuel indirin. FriendlyARM NanoPi NEO Plus2 13 sayfaları. Arm board

NanoPi NEO Plus2

wiki.friendlyarm.com

Introduction

The NanoPi NEO Plus2 is another Allwinner based

ARM board developed by FriendlyElec. It uses

Allwinner's 64-bit quad-core A53 SoC with hexa-

core Mali450 GPU and features 1GB of DDR3 RAM

and 8GB eMMC.

With a small size of only 40 x 52mm the NanoPi

NEO Plus2 has rich on-board resources: AP6212A

WiFi & Bluetooth module, Gbps Ethernet and two

USB hosts. It supports system-boot from a MicroSD

card.

The NanoPi NEO Plus2 has a carefully designed

power system and 6-layer PCB layout. These

features enhance the board's heat dissipation.

The NanoPi NEO Plus2 meets popular IOT

applications requirements for small size, high-speed

and large throughput data transmission and high

performance computing.

Hardware Spec

SoC: Allwinner H5，Quad-core 64-bit high-

performance Cortex A53

DDR3 RAM:1GB

Storage: 8GB eMMC

Network: Gbps Ethernet

WiFi: 802.11b/g/n

Bluetooth: 4.0 dual mode

USB Host: 2 x Independent USB Host

MicroSD Slot: 1 x Slot. It supports system booting

or is used to hold a storage card

Audio Input/Output: 5-Pin, 2.0mm pitch pin-header

MicroUSB: power input

Debug Serial: 4Pin, 2.54mm pitch pin-header

GPIO1:24Pin, 2.54mm pitch double-row pin-header

containing UART, SPI, I2C and IO

GPIO2:12Pin, 2.54mm pitch pin-header containing

USB, IR receiver,I2S and IO

Power Supply: DC 5V/2A

PCB Dimension: 40 x 52mm

PCB Layer: 6-Layer

/wiki/index.php/NanoPi_NEO_Plus2

Overview

Front

Back

1/13