DV8 OFFROAD FDGL-07 Kurulum Kılavuzu - Sayfa 7

Otomobil Aksesuarları DV8 OFFROAD FDGL-07 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DV8 OFFROAD FDGL-07 10 sayfaları. Slim fenders 2020+ jeep wrangler jt

Sayfayı Yazdır

INSTALLATION

MANUAL

STEP 10 |

Install the gaskets onto

the fenders.

The gaskets are notched to line up with

the mounting holes on each fender.

Install the fender flare

onto the vehicle using the provided

M6x20 hardware with a 4mm allen bit.

Secure the mounting supports using the

supplied M6x25 hardware with a 4mm

allen bit and 10mm wrench.

During install, check the gasket on the

fenders and tuck away any extra gasket

using a trim clip tool.

Note: Assistance is recommended to prevent

injury and damage to the product or vehicle.

STEP 11 |

Route and secure the

wiring to your preference and install the

new turn signal into the factory connector.

Note: It is important that the wiring is

secure and tucked away. Do not let it hand

down into the fender.

Repeat process for the other side.

NEED HELP?

855-680-9595