DV8 OFFROAD RBJL-13 Kurulum Kılavuzu - Sayfa 12

Otomobil Aksesuarları DV8 OFFROAD RBJL-13 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DV8 OFFROAD RBJL-13 13 sayfaları. Jl full width rear bumper

Sayfayı Yazdır

INSTALLATION

MANUAL

STEP 21 |

Align the bumper left-to-

right and up-and-down. Check the wings

to ensure neither are touching the body of

the vehicle.

The bumper should be sitting level on the

vehicle and there should be consistent

gaps between the wings and the body of

the vehicle.

When fitted properly secure the hardware

holding the bumper to the mounting

brackets using a 21mm socket and 22mm

wrench.

STEP 22 |

Adjust the in-and-out

position of the bumper ensuring there

are consistent gaps between the bumper

and vehicle, and that the bumper is not

touching the vehicle.

Secure provided M12 hardware on the

bottom of the frame rail using a 19mm

socket.

Finish securing all facotry

hardware using a 18mm or 21mm socket.

Torque factory hardwareto 66 ft-lbs.

Note: The tool required may vary based on trim.

NEED HELP?

855-680-9595