DV8 OFFROAD SPEC Series Kurulum Kılavuzu - Sayfa 5
Otomobil Aksesuarları DV8 OFFROAD SPEC Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DV8 OFFROAD SPEC Series 12 sayfaları. Rear bumper for 2018+ jeep jl wrangler
Ayrıca DV8 OFFROAD SPEC Series için: Ürün Kurulum Kılavuzu (10 sayfalar), Kurulum Kılavuzu (10 sayfalar), Kurulum Kılavuzu (9 sayfalar)
Sayfayı Yazdır
INSTALLATION
MANUAL
STEP 7 |
Remove the rear license
plate to access the two 16mm bolts
attaching the bumper to the hitch.
STEP 9 |
Using the 16mm socket,
remove the four bolts (2) on each side,
holding the bumper to the hitch.
Note: The bumper will become loose from the
vehicle. Use extra cation to prevent damage or
possible injury.
STEP 10 |
If equipped with a bumper
mounted hitch ball, remove this at this
time. If equipped with the factory Class III
hitch, you can skip this step.
NEED HELP?
855-680-9595