4ms Company SCMBO İnşaatçı El Kitabı

Bilgisayar Donanımı 4ms Company SCMBO için çevrimiçi göz atın veya pdf İnşaatçı El Kitabı indirin. 4ms Company SCMBO 4 sayfaları. Shuffling clock multiplier breakout (expansion module for the shuffling clock multiplier) kit builder's guide for pcb v1.1

Sayfayı Yazdır

(Expansion Module for the Shuffling Clock Multiplier)

Shuffling Clock Multiplier Breakout

This guide is for building a Shuffling Clock Multiplier Breakout module (SCMBO) from the 4ms kit.

The SCMBO requires an SCM to operate, as it connects directly to the SCM board to add features to

the SCM. For more information, you can download the SCMBO manual here:

http://4mspedals.com/scm.php

Step 1: Diodes and resistor

Insert and solder the diodes and resistor. After soldering, snip the leads nearly flush to the PCB (you'll

be snipping the leads flush on all the components after soldering). There's a black band on each diode

that must go towards the line on the PCB (the arrow on the PCB points towards the band).

•

"Si" 1N914 diodes x 6 (small red glass diodes)

•

"5V" 1N4733 Zener diodes x 6 (slightly larger red glass diodes, labeled "4733")

•

10k resistor x 1 (Brown Black Orange Gold)

4ms S.C.M. Breakout

Kit Builder's Guide for PCB v1.1

4mspedals.com