Aussie RAPTOR 16 Operatör Kullanım Kılavuzu - Sayfa 5
Basınçlı Yıkama Aussie RAPTOR 16 için çevrimiçi göz atın veya pdf Operatör Kullanım Kılavuzu indirin. Aussie RAPTOR 16 16 sayfaları. Electric hydro-blaster
Sayfayı Yazdır
WARNING... Do Not Alter Pressure Setting
Altering the high pressure unloader device and safety valve may result in severe injury or death. Warranty
will be void if any high pressure valve equipment has been altered by non-qualified staff. Over-speeding or
over-pressurizing of the pump system is dangerous and can severely reduce the operating life of the
machine. It may also result in injury or death!
SAFETY PRECAUTIONS - IMPORTANT
1.
Never direct the spray jet at any person or animal.
2.
Never direct spray jet at any surface that may contain asbestos material.
3.
Never hold a finger over the high pressure nozzle.
4.
Never direct the spray jet at the machine itself or any electrical equipment.
5.
After use release the pressure in the high pressure hose by operating the pistol
trigger.
6.
Electric cables should not be left in a position where water can come into contact
with the electric cable. Always keep electrical connections dry and off the ground
7.
When not in use always switch off the engine and disconnect from water supply.
8.
Certain components become very hot when in use.
ALLOW TO COOL before touching.
9.
Do not attempt any mechanical repair. If you have a problem with your machine
contact your local dealer or Aussie Pumps service division, phone 02 8865 3500
10.
Never supply any liquid other than clean water to the water inlet.
11.
Never pull the high pressure hose if it has formed kinks or nooses. Never pull the
hose over sharp objects.
12.
Use only chemical cleaning agents (detergents) approved for power washing when
using the chemical injection facility.
13.
Never use the chemical injection facility to introduce solvents, e.g. paint thinners,
petrol, oil, etc.
14.
Do not attempt to disconnect any hose or coupling with pressure still in the hose.
15.
Do not operate the machine whilst standing on ladders, use a platform tower or
scaffolding.
16.
Children should not be allowed to use the machine.
17.
We recommend the use of safety goggles when using the machine, particularly with
the sand blasting attachment, or any application where loose particles of stone or grit,
etc, may be blown around by the high pressure spray.
18.
The electrical power voltage must agree with the voltage specified on label on base of
machine. [Note: Improper connection will damage machine and void warranty.]
19.
The machine must be grounded. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and
ordinances.
20.
Do not modify the plug provided with the machine. If plug does not fit your outlet
have a proper outlet installed by a qualified electrician.
21.
Do not use any type of double adaptor or multiple socket power board with this
product.
22.
Do not touch plug with wet hands.
23.
To avoid damage to cable do not roll, crush or pull it. The power cable may only be
repaired or replaced by an trained electrician.
24.
Disconnect the plug from power supply and relieve pressure to hose before
attempting any work on the machine.
July 2012
Raptor Electric Operator's Manual
Australian Pump Industries
Switch off the blaster and
5