DVB SPEC Series Kurulum Kılavuzu - Sayfa 7
Otomobil Aksesuarları DVB SPEC Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DVB SPEC Series 15 sayfaları. Winch front bumper for 2021+ bronco
Sayfayı Yazdır
INSTALLATION
MANUAL
STEP
1
Begin by unpacking all items and
inspecting for missing pieces or
damage. If you have any concerns,
please contact the company the
product was purchased from.
Hardware Included:
(3) M8x40 Hex
(4) M12x35 Hex
(3) M8 Flat Washers
(8) M12 Flat Washers
(9) M8 Spring Washers
(4) M12 Nylon Nuts
(10) M8x30 Allen
(6) M10x40 Hex
(20) M8 Flat Washers
(6) M10 Flat Washers
(10) M8 Serrated Nuts
(6) M10 Spring Washers
(16) M6x20 Allen
(6) M10 Flat Nuts
(4) M6 Serrated Nuts
(20) M6 Flat Washers
STEP
2
Apply the adhesive side of the
provided foam pieces to the wings of
the bumper.
STEP
3
Use an 18mm and 19mm deep socket
with the provided M12 hardware
to loosely secure the wings to the
bumper.
Adjust the wings so that they sit flush
with the bumper and then finish
securing the hardware.
Note: A deep socket is needed to access
the nut in the recessed area of the bumper.
855-680-9595
NEED HELP?