DVC 5630-006 Kurulum, Çalıştırma ve Bakım Kılavuzu - Sayfa 2
Kontrolör DVC 5630-006 için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Bakım Kılavuzu indirin. DVC 5630-006 16 sayfaları.
Sayfayı YazdırWith Dansk Ventil Center A/S as
partner, you are always guar-
anteed a wide and well sorted
product range and a unique
technical know-how
Product development is a key
factor for DVC,
ensuring you the best
products at any time
1.
INTRODUCTION
1.1
Purpose
The purpose of this manual is to introduce and explain the installation, operation and maintenance of 5630-006 electric actuators.
1.2
Safety notices
Safety notices in this manual outline precautions the user must take to reduce the risk of personal injury and damage to the equipment. The user(s) must
read these instructions before the installation, operation or maintenance of 5630-006 electric actuators.
DANGER: Refers to personal safety. Alerts the user to danger or harm.
!
The hazard or unsafe practice will result in severe injury or death.
WARNING : Refers to personal safety. Alerts the user to potential danger.
!
Failure to follow warning notices could result in personal injury or death.
CAUTION Directs the user's attention to general precautions that, if not
!
followed, could result in personal injury and/or equipment damage.
2. PRODUCT IDENTIFICATION
2.1 Product identification
The actuator name plate is located on the opposite side of the conduit entry. The name plate contains the following:
2.1.1 Marking
A) General
NOTE: NAME OF MANUFACTURER AND COUNTRY SHALL NOT BE PRINTED BASED ON OEM.
1
Know-how makes the difference
INDEX
1 INTRODUCTION ...............................................................................................1
2 PRODUCT IDENTIFICATION............................................................................1-2
3 GENERAL INFORMATION AND FEATURES....................................................2-4
4 INSTALLATION ............................................................................................4-11
5 OPERATION................................................................................................11-12
6 MAINTENANCE..........................................................................................12-13
7 TROUBLE SHOOTING ....................................................................................13
8 DIMENSIONS...................................................................................................14
DVC logo (trade mark)
Model
Electrical Power Supply
Torque
Operating time (Seconds)
Type
Rated current
Option
Serial No.