DVDO EDGE Ürün Kılavuzu Eki - Sayfa 11

Medya Dönüştürücü DVDO EDGE için çevrimiçi göz atın veya pdf Ürün Kılavuzu Eki indirin. DVDO EDGE 16 sayfaları. Dvdo edge high definition video processor & hub

Sayfayı Yazdır

Safe Mode

Safe Mode is a new feature in Firmware v1.1. It is entered

and exited by pressing the GUIDE button when the remote

is in DVDO mode.

Safe Mode was added to solve a potential problem when using

1:1 Frame Rate. When 1:1 Frame Rate mode is enabled, EDGE's

output frame rate will track the input frame rate, which means that

EDGE's output frame rate can and will change.

Use GUIDE

If a display can not support the new frame rate, it may go blank,

button to

leaving you with no picture. If that happens, you can press the

enter and

GUIDE button to enter Safe Mode.

exit Safe Mode

In Safe Mode, EDGE will revert to an output format that will give

you a picture. You will have access to the menus and you can

make whatever changes you need to prevent the screen from

going blank. Usually, the change you need to make is to disable

1:1 Frame Rate.

Safe Mode also resets Underscan back to 0, because Underscan

can also cause a breakup in your picture under certain conditions.

If you make changes to menus while in Safe Mode, these changes

do not take effect until you exit Safe Mode.