Cooey WHT1-808-B Kullanıcı Kılavuzu - Sayfa 14

Kan Basıncı Monitörü Cooey WHT1-808-B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cooey WHT1-808-B 17 sayfaları.

Sayfayı Yazdır

TROUBLESHOOTING

This section includes a list of error messages and frequently

asked questions for problems you may encounter with your blood

pressure monitor. If the products not operating as you think it

should, check here before arranging for servicing.

PROBLEM SYMPTOM

Display will not

No power

light up.

Low

Display is dim or

shows

batteries

E1 shows

E 3 shows

E 10 or

E 11 shows

Error

massage

E 20 shows

E 21 shows

EExx,shows on

the display.

CHECK THIS

REMEDY

Power is exhausted.

Charge the power

Power is low.

Charge the power

Check if the App is on or

not,try data transmission

Communication error

again.

Refasten the cuff and

relax for a moment and

The cuff is not secure.

then measure again.

The monitor detected

motion,talking or the

Relax for a moment

pulse is too poor while

and then measure again.

measuring.

The measurement

Loosen the clothing on

process does not detect

the arm and then

the pulse signal.

measure again.

The treatment of the

Relax for a moment and

measurement failed.

then measure again.

Retake the measurement.

If the problem persists,

contact the retailer or our

A calibration error

customer service

occurred.

department for further

assistance.Refer to the

warranty for contact

information and return

instructions.

3.7V 1000mAH Built-in rechargeable li-polymer

Power supply

battery, 6V

Blue LCD with White Backlight

Display mode

V.A.= 86.1mm(L) x24mm(W)

Measurement mode

Oscillographic testing mode

Rated cuff pressure:

0kPa-40kPa (0mmHg-300mmHg)

Measurement range

Measurement pressure: 5.3kPa-30.7kPa

(40mmHg-230mmHg)

pulse value:(40-199)beat/minute

Pressure:

Accuracy

5℃-40℃within±0.4kPa(3mmHg)

pulse value:±5%

Temperature:5℃ to 40℃

Normal working condition

Relative humidity: ≤85%RH

Atmospheric pressure: 86kPa to 106kPa

Temperature:-20℃ to 60℃

Storage & transportation

Relative humidity: 10%RH to 93%RH

condition

Atmospheric pressure: 50kPa to 106kPa

Measurement perimeter

About 22cm-32cm

of the upper arm

Net Weight

Approx.265 g

External dimensions

Approx.130.9mm×73mm×29.4mm

Attachment

AC Adaptor,user manual

Mode of operation

Continuous operation

Degree of protection

Type BF applied part

IP22, It means the device could protected

Protection against

against solid foreign objects of 12.5 mm and

ingress of water

greater, and against vertically falling water

drops when ENCLOSURE tilted up to 15°

Software version

V01

Battery Powered Mode:

Internally Powered ME Equipment

Device classification

AC Adaptor charged Mode:

Class II ME Equipment

WARNING: No modification of this equipment is allowed.

SPECIFICATIONS

1A AC Adaptor