ADE M500020 Series Kullanım Kılavuzu - Sayfa 9

Terazi ADE M500020 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE M500020 Series 16 sayfaları. Electronic wheelchair and multipurpose scales

Sayfayı Yazdır

Menus structure of setting mode:

After entering the clear button following options are available and appear on the screen when moving with the

navigation buttons:

FILTER

SERIAL

Setting date and time

–

Enter the CLEAR key for approx. 4 sec; FILTER appears on the display.

–

Press key "6" six times and TIME appears on the display.

–

Press ENTER key and SHOW appears on the display.

–

Press key "6" one time and HOUR appears on the display.

–

Press ENTER key and set the hours using the arrow keys "2", "4", "6" and "8".

–

Press the ENTER key and set the minutes and seconds.

–

Go back by pressing key "2"; TIME appears on the display.

–

Press key "6" one time and DATE appears on the display like the time entry.

–

Press key "2" two times and EXIT Y appears on the display.

–

Confirm with ENTER and date & time are set.

Modes of operation

 Weighing mode

The "weighing mode" is of course the standard mode of your scale. After initial configuration and sealing (by

attaching a calibration sticker to the back of the unit), the ADE-scale can only be operated in this mode.

 Setting mode

Date, time and consecutive numbers for print commands are being set in this mode. To start setting mode,

hold the GROSS/NET key pressed until TIME appears on the display.

 Configuration mode (set-up mode)

The values for different parameters including the calibration could be set in the configuration mode. This func-

tion is reserved for authorized service personnel only.

 Test mode

There are different diagnostic functions for the ADE-MAK in test mode. This is reserved for service personnel

only.

Manipulations to test and configuration modes can revoke the calibration status and will result

in loss of warranty!

Weighing

Press the ON key for at least 3 seconds to turn the scales on. An automatic function test will be conducted

afterwards. The test is done when the display shows zero. The scale is now ready for the weighing procedure.

Resetting the scales back to zero: Wait until the standstill status indicator

ZERO key (8), measuring inaccuracies after switching on the scale are being compensated. The zero key

restarts the scale. The status indicator (6)

The modell M500020-D is being supplied with a seat. The seat is designed to take a weight upto

100kg. Take care that the patient, who uses this seat is weighing not more than max. 100kgs..

M500020-210322-Rev009-UM-e

PROGR

PFORMT

SETPTS

TEST

TIME

Operation

appears when the scale is being resetted.

DATE

VERS

(14) appears. By entering the