AUSSIE TONNEAU ATB01030 Kurulum Talimatları Kılavuzu - Sayfa 6
Otomobil Aksesuarları AUSSIE TONNEAU ATB01030 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. AUSSIE TONNEAU ATB01030 6 sayfaları. Ford ranger px single cab with headboard
Sayfayı Yazdır
3.2 FITTING MULTI-FIT SUPPORT BAR
1. Insert solid bar pieces into either end of hollow tube. Adjust bar so it fits between bar bracket
holders with the holes facing to the ground (so the grub screws don't rub against the tonneau), as
shown above and then with a white pencil make a mark through the small holes of the hollow bar
onto the solid ends. This is where you will drill a hole to the depth of about 1-2mm (do not go any
further)
2. Join the pieces back together and screw grub screws through the hollow bar into the holes that you
drilled. Make sure you do not over tighten the grub screws. Refit the bar. You may kink the bar in
the middle to give it some extra height to assist with water runoff.
4. WARRANTY AND FEEDBACK
Register now to activate your 3 year warranty by filling out our online form!
QR Code:
Website Link
:
http://www.aussietonneaus.com.au/en-au/warranty-card-request-form.html
Please complete our 2 minute feedback section as we strive to constantly improve
Thank you for purchasing an Aussie Tonneaus Product.
for our customers
.