Datavideo TLM-702 Kullanım Kılavuzu - Sayfa 7

Monitör Datavideo TLM-702 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Datavideo TLM-702 10 sayfaları. 7” x 2 tft lcd monitors
Ayrıca Datavideo TLM-702 için: Kullanım Kılavuzu (9 sayfalar)

Sayfayı Yazdır

Functions - Front Panel

Each monitor has a two colour tally light indicator which

can be connected to the Datavideo RMC 140, SE500 or

similar products. AMBER indicates Cued and RED

indicates Live.

Each Monitor has individual adjustments for Brightness,

Contrast, Colour and Tint (Tint is for NTSC only).

These four adjustments can be adjusted with a X headed

screwdriver.

It is recommended that you use a Test Pattern to adjust

the monitors.

The ASPECT button switches the aspect ratio from 16:9

and 4:3.

Source select switches between video input 1 and video

input 2. (Each monitor has a choice of two video inputs)

Power On / Off switches the monitor On or Off

On either side of the TLM-702 are small Allen Key screw

tension adjustments. These alter the tension on the

pivoting mechanism. If you want to change the angle of

the monitors, i.e. aim them up or down, you can loosen

these screws and adjust the TLM-702. Once you have set

the correct angle tighten the screws back up.