DVIGear DVI-4101 Kullanıcı Kılavuzu - Sayfa 2

Alıcı DVIGear DVI-4101 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DVIGear DVI-4101 4 sayfaları. Ir remote receiver

Sayfayı Yazdır
1.0
INTRODUCTION
The DVI-4101 is a Remote Infrared Receiver designed for use with the following
DVIGear DVI and HDMI switchers:
Model
Number
DVI-4121
Switcher DVI + HDCP 2x1
DVI-4141
Switcher DVI + HDCP 4x1
This device is an ideal solution for applications where the switcher must be located in
a remote area outside of the normal range of the switcher's IR Remote Control unit.
Thanks to its small profile and unobtrusive design, the DVI-4101 can be mounted
in an inconspicuous location where it can receive commands from the switcher's
IR Remote Control unit. These commands are then sent to the switcher using a
supplied 4.9 foot (1.5 meter) 3.5 mm interconnection cable.
2.0

SPECIFICATIONS

To use the DVI-4101, first power OFF the switcher and disconnect the unit's external
power supply. Next connect the 3.5 mm interconnect cable to the receptacle on
the back side of the switcher labeled "Remote" or "Extender IR". Next connect the
other end of the interconnect cable to the 3.5 mm receptacle on the back side of the
DVI-4101. Finally, reconnect the switcher's external power supply and power ON
the switcher. Verify that the switcher accepts all remote control commands that are
directed at the DVI-4101.
TM
2x1 Switcher
IR commands are sent from the DVI-4101
HDMI
OUTPUT
to the switcher via an interconnect cable.
The cable plugs into a 3.5mm receptacle
on the back of the DVI-4101.
NOTE: When the DVI-4101 is connected to the switcher, the switcher's front panel
IR receiver is disabled.
Product Description
IR
2
Model
Number
DVI-4521a
DVI-4541a
DVI-4581a
C
OUTPUT
9VDC
REMOTE
1
2
Remote IR Receiver Input
HDMI
INPUTS
-1-
Product Description
Switcher HDMI 2x1
Switcher HDMI 4x1
Switcher HDMI 8x1
2
INPUTS
INPUT SELECT -
POWER
POWER ON/OFF
Extend IR
1
1
RS 232