Austere 7S-PS4-US1 Kullanıcı Kılavuzu - Sayfa 3
Aşırı Gerilim Koruyucu Austere 7S-PS4-US1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Austere 7S-PS4-US1 6 sayfaları.
Ayrıca Austere 7S-PS4-US1 için: Kullanım Kılavuzu & Kullanıcı Kılavuzu (6 sayfalar)
Sayfayı YazdırPlug in Austere Power into your AC Power Line: Be sure it is plugged into a standard, 3-wire
grounded 120V AC, 60Hz outlet.
Turn your power unit ON: Press the power switch / reset button until the three LED indicator
lights illuminate blue, indicating the unit is On and connected to AC input power. Review the
LED status indicator Lights: Check the LEDs prior to connecting any of your equipment. They
will indicate the optimum power operating conditions when plugged into a 120V AC outlet.
Power LED: Will illuminate blue when lit. This indicates that Austere Power is
plugged in and receiving power.
Ground LED: Will illuminate blue when lit. This indicates that Austere Power is
plugged into a properly grounded circuit. If the Ground LED does not illuminate, there is
something wrong with the electrical wiring to the AC outlet, and we recommend having
it inspected by a licensed and insured electrician. When the Ground LED is not
illuminated, your equipment is NOT protected from surge or irregular power events.
Powering your equipment with Austere Power in the absence of Ground LED voids
the Austere Limited Lifetime Guarantee and the Component Guarantee.
Protected LED: Will illuminate blue when lit. This indicates Austere Power surge
suppression components are intact and providing full protection against surges. When
the Protected LED no longer illuminates, it is time to replace the unit. When the
Protected LED is not illuminated, your equipment is NOT protected from surge or
irregular power events. Powering your equipment with Austere Power in the absence
of a Protected LED voids the Austere Limited Lifetime Guarantee and the Component
Guarantee.