Datavideo RMC-180 Kullanım Kılavuzu - Sayfa 11

Kontrolör Datavideo RMC-180 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Datavideo RMC-180 19 sayfaları. Ptz camera control unit
Ayrıca Datavideo RMC-180 için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır

FN11

FIRMWARE VER.

FN12

CAM INFO.

FN1. EXIT

Exits the setup menu mode.

FN2. USB HID MODE

FN2 enters the RMC-180 into the USB HID communication mode. To operate the RMC-180 in this

mode, it must be connected via a male-to-male USB cable to a laptop or PC with a specially

designed user interface installed.

FN3. CAM ADDR

The camera address range is from 81 to 87.

Note: The camera address setting must match the VISCA ID setting of the PTC-150 DIP switch

which can be located at the bottom of the PTC-150 camera. For example, VISCA ID 1 corresponds

to the camera address 81.

FN4. JOYSTICK DIR

FN4 sets the PAN and TILT directions.

PAN toggles the camera pan direction between NORMAL and REVERSE.

TILT toggles the camera tilt direction between NORMAL and REVERSE.

Note: When ERROR message is displayed, the RMC-180 fails to detect any camera device

connected.

FN5. VIDEO FORMAT

Video output format selection. Available video output formats are:

• 1080/60i

• 1080/50i

• 720/60p

• 720/50p

• 1080/30p

• 1080/25p

• 1080/60p

• 1080/50p

Version

VENDOR ID

MB VER

FPGA VER

MOTOR VER

X.X

XXXX

XX.XX

XXX

XX.XX