ADE Olivia BE 1510 Kullanım Kılavuzu - Sayfa 16

Terazi ADE Olivia BE 1510 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE Olivia BE 1510 19 sayfaları. Bathroom scales

Starting up

Inserting/changing batteries

For use you require one battery of the type CR2032, 3 V (included). The

battery compartment is located on the underside of the device.

4. Remove the battery compartment cover.

5. Push the battery towards the contact springs under the big, angular retaining

plate and then press it down. The battery will snap into the holding lugs on the

opposite side and the battery will be held firmly in its holder.

Pay attention to the correct polarity (+/-). The plus pole (+) must point upwards.

6. Replace the battery compartment cover. The battery compartment cover must

snap securely into place.

Suggestions for changing the battery:

 A battery change is necessary when "Lo" or nothing at all is shown on

the display.

 Only use the type of battery that is specified in the "Technical data".

 Dispose of the old battery in an environmentally responsible way

(see "Disposal").

 Calibrate the scale, see "Setting the scale".

Choosing the unit of measurement

When the scales are delivered, the unit of measurement is set to "kg" as standard.

However, the measurement result can also be displayed in the English unit "lb"

(pound) or "st" (stone).

- Push the kg/lb button on the back of the scales.

Note the display.

Positioning the scales

3. Place the scale on an even, firm, and dry surface. Do not place the scales

on a carpet.

4. First, briefly step onto the middle of the weighing surface to calibrate the

scale. As soon as the display shows "0.0", calibration is complete. This

calibration must be performed after each battery change.