ADE PWI30 Kullanım Kılavuzu - Sayfa 6

Terazi ADE PWI30 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ADE PWI30 16 sayfaları. Electronic bench scales portion scale with induction charging

Sayfayı Yazdır

The charge status is indicated by

low charge status is indicated by flashing charge status or LO lights up on the display

and the scale turns off automatically.

When charging, make sure that the adapter is at least 5 cm away from metal objects.

If the operating time with fully charged batteries is drastically reduced, the battery must

be replaced. In this case, please contact your local dealer or service partner.

Make sure that the local mains voltage matches the operating voltage printed on the

adapter.

If you will not be using the scale for an extended period of time, disconnect the power

supply from the mains and remove the battery to protect the scale.

The energy transfer between the induction charger and the scale is contactless. The

radio symbols

side of the induction charger and in the area of the induction charging base of the

scale). Charging takes place only when both elements/symbols are opposite each

other!

The charging function is available only if the distance between the transmission and

reception elements is sufficiently small. It is therefore necessary to ensure that the

induction charger is properly positioned in the induction charging base.

LED display for induction charging

The induction charger LED indicates the charge status as follows:

Charger LED

LED off

LED steady green

LED steady red

LED flashes red and green

If the scale is turned on, the charging process will be indicated by a rolling battery symbol

on the display. Once charging has been completed, the rolling will stop.

on the display. Charge the battery as soon as a

indicate the position of the transmission and reception elements (top

Slide the induction charger  into the induction

charging base  and connect the charging adapter

 to the local mains supply.

The printed voltage level must comply with the

local voltage.

The batteries in the scale will start to charge.

Battery symbol on the display

Current battery status indicator

Evenly rolling battery symbol

no battery symbol

Current battery status indicator

Charge status

Charger is not connected to mains.

Charging is ongoing

Charging is complete or mains

operation (without batteries)

Charger connected to mains, but not to

scale.

Sensor fault.

PWI30-190920-Rev005-UM-en