DVS G3 İşletme Manüelleri - Sayfa 9
Fan DVS G3 için çevrimiçi göz atın veya pdf İşletme Manüelleri indirin. DVS G3 10 sayfaları. Small inline filter
Ayrıca DVS G3 için: Kullanım Kılavuzu (3 sayfalar), Montaj Talimatları (2 sayfalar)
![DVS G3 İşletme Manüelleri](/uploads/products/server2/1817849/1817849.jpg)
This Appendix describes and provides instructions for setting each of the five touch screen menus.
MAIN MENU 1
POWER MENU
The POWER menu allows you to turn your whole DVS
OFF via the MODE button, or to operate on pre-set TIMER settings via SET
TIMER button.
WARNING: While the Air Handling Units (and other equipment attached to the
G3 Reclaim) will be switched off when OFF or because of your timer selection,
they are still connected to the house power supply.
MODE Selection
Press MODE to change the POWER setting to either:
ON
RECOMMENDED. The G3 Reclaim system will run continuously, except when it may
be automatically turned off according to the algorithm.
OFF
NOT RECOMMENDED. The G3 Reclaim system will remain
turned off until ON or TIMER is selected.
TIMER
RECOMMENDED for SPECIFIC CIRCUMSTANCES ONLY.
AIR FLOW MENU
The AIR FLOW menu enables you to adjust and fine-tune the airflow level higher or lower than the pre-
set calibrated level (represented by the '0' setting). The adjusted AIRFLOW will apply to both FAN's.
The AIR FLOW setting of '0' is the calibrated and recommended level of airflow to achieve winter-time
condensation control for your home.
Press the UP arrow to increase fan speed and air flow. Press the DOWN arrow to decrease fan speed
and air flow.
FAN BOOST
Changes the airflow to 200% of calibrated speed (both fans) for the period
selected. Once the timer has expired the air flow will revert to the speed
determined by the AIR FLOW menu. This option is useful for clearing the house
quickly of extra moisture or smells.
Note: The fan will be noisier at this speed.
MAIN MENU 2
SYSTEM MENU
The SYSTEM menu allows you to set your CLOCK, adjust the Screen
CONTRAST and activate or de-activate the CHILD LOCK.
SET CLOCK
Press the Day/Time on the Current Status screen or press the MENU
and MORE buttons to bring up the Main Menu 2 screen. Select SYSTEM
menu and then press SET CLOCK.
Menu Settings
®
Reclaim system ON or
Appendix 4