Dateq CREW Kullanıcı Kılavuzu - Sayfa 12
Müzik Mikseri Dateq CREW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dateq CREW 12 sayfaları.
Sayfayı Yazdır
EN
Dateq Crew Manual
Technical Specifications
MONO INPUT
MIC (channel 1 and 2) ....................................... XLR-3 female, electronically balanced
Signal level............................................... -50 dB @ 600 Ohm variable
Impedance ............................................... 3 kOhm nominal
Input noise................................................ < -100 dB (IHF-A)
Headroom ................................................ 22 dB
STEREO INPUTS
LINE (channel 2)................................................ Cinch
Signal level............................................... 0 dB @ 600 Ohm variable
Input impedance ...................................... 12 kOhm nominal
Input noise................................................ < -70 dB (IHF-A)
Channel separation.................................. > 65 dB @ 1 kHz
LINE 1/ 2 (channel 3..7)..................................... Cinch
Signal level............................................... 0 dB @ 600 Ohm variable
Input impedance ...................................... 7 kOhm nominal
Input noise................................................ < -74 dB (IHF-A)
Channel separation.................................. > 65 dB @ 1 kHz
TONE CONTROL
EQUALISER CHANNEL 1 AND CHANNEL 2
High.......................................................... 10 kHz ±12 dB, Shelving
Low .......................................................... 30 Hz ±18 dB, Shelving
EQUALISER MASTER
High.......................................................... 12 kHz ±12 dB, Shelving
Low .......................................................... 30 Hz ±18 dB, Shelving
OUTPUTS
BALANCED MASTER (XLR)............................. +6 dB balanced/ 600 Ohm/ variable
MASTER OUT A/ B (Cinch) .............................. 0 dB unbalanced/ 600 Ohm/ variable
ZONE1...4.......................................................... 0 dB unbalanced/ 600 Ohm/ variable
PHONES (6,3 mm TRS Jack) .......................... 0,3 W @ 4 Ohm/ Impedance 4..32 Ohm
FREQUENCY RESPONSE
MIC TO MASTER .............................................. 15 Hz...25 kHz -1 dB
ALL OTHER INPUTS TO MASTER .................. 10 Hz...30 kHz -1 dB
THD + N ............................................................ 0,01 % nominal
GENERAL
BUILT-IN POWER SUPPLY
Mains voltage ........................................... 220...240 VAC / 50 Hz
Power consumption................................. 20 VA
SIZE AND WEIGHT
Front......................................................... 483 x 132 mm (W x H) = 19", 3HE
Cutout ...................................................... 445 x 132 mm (W x H)
Cabinet depth........................................... 110 mm without connectors
Weight...................................................... 3.5 kg Net.
Dateq Audio Technologies B.V. reserves the right to amend specifications without notice
Technical Specifications
11