DW Blackjack DW-BJRR2Y T Series Hızlı Başlangıç Kılavuzu - Sayfa 7
Sunucu DW Blackjack DW-BJRR2Y T Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. DW Blackjack DW-BJRR2Y T Series 12 sayfaları. Rack server
Sayfayı Yazdır
6. Click OK to close then click close to go back to network connections.
Local Network
7. Right-click on the other Ethernet, the one with network cable unplugged, and click "Properties".
6. Click OK to close then click Close to go back to Network Connections.
Local Network
8. Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties".
7. Right click on the other Ethernet, the one with network cable unplugged, and click Properties.
8. Click Internet Protocol Version 4 (TCP/IPv4) and click Properties
9. Select "Use the following IP address" (Use the following DNS server addresses will be selected automatically).
10. Enter IP address and subnet mask of the camera network.
* Consult with your IT department if you do not know what IP address to use.
* Consult with your IT department if you do not know what IP address to use.
9. Select Use the following IP address (Use the following DNS server addresses will be selected automatically)
10. Enter IP address and Subnet mask of the camera network.
11. Click OK to close then click close to go back to network connections.
11. Click OK to close then click Close to go back to Network Connections.
12.
Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.
13. Close the Network Connections by clicking X on the upper right corner of Network Connections.
12. Connect a network cable to the Ethernet port B10 on the diagram (page 2) to the switch on the local network.
13. Close the network connections dialog.
11. Click OK to close then click Close to go back to Network Connections.
12.
Connect a network cable to the Ethernet port B8 on the diagram (page 2) to the switch on the local network.
13. Close the Network Connections by clicking X on the upper right corner of Network Connections.
Linux
1.
Double-click the Network icon
Linux
1.
Double-click the Network icon
on the Desktop
NOTE
The Blackjack Cube's network settings are set to DHCP as default.
NOTE
The Blackjack Cube's network settings are set to DHCP as default.
2. Select 'Wired' that has arrows pointing up and down from the list (If neither of the "wired" are showing arrows up and downs, then make
2. Select 'Wired' that has arrows pointing up and down from the list (If neither of the "wired" are showing arrows up and downs, then make
sure the network cable is connected to the PoE switch on the camera network from
sure the network cable is connected to the PoE switch on the camera network from
3. Click 'Options' at the bottom of the window.
3. Click 'Options' at the bottom of the window.
4. Click on the 'IPv4 Settings' tab.
4. Click on the 'IPv4 Settings' tab.
5. From the drop-down menu, select connection type ("Method") as Manual.
5. From the drop-down menu, select connection type ("Method") as Manual.
6. Click 'Add' next to Addresses.
6. Click 'Add' next to Addresses.
on the Desktop
STEP
1)
STEP
1)
Quick Start Guide
7