CooKing SURFACE PRIME SVIF-CK 4.0 Kullanım Kılavuzu - Sayfa 7

Hob CooKing SURFACE PRIME SVIF-CK 4.0 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CooKing SURFACE PRIME SVIF-CK 4.0 13 sayfaları.

7 - INSTRUCTIONS FOR USE

1.Switching on the system: press the ON/OFF key to switch on the induction hob. The device will emit an audible signal and

simultaneously an indicator LED will light on the remote control. Now press the key for the required cooking zone to start the

cooking process. The circular symbol for the selected cooking zone will switch on. Finally, press the (+) level key to start the

system with the required power level. The selected power level will illuminate in the circle corresponding to the activated cooking

zone. If there are no pots or pans in the selected cooking zone, or if the material of which the pots and pans are made is not

compatible with the system, error "E1" will appear intermittently and the system will disconnect automatically after 60 seconds.

If the system detects a pan before the 60 seconds elapse, it will automatically start supplying power

2.Timer mode: the "TIMER" key can operate with all the selected power levels. The timer can be set after the power level has

been selected. Press the timer + key and the LCD will show "0:00" intermittently. Press "+" or "-" to increase or decrease the time

setting from 1 minute up to 2 hours. Once the timer has been set, the display will show a countdown after which the cooking

zone will switch off. If the time setting is "0:00", the timer function will be disabled.

Note: press and hold the "+" or "-" key for 3 seconds to increase or decrease the time in 10 minute steps.

3.Lock mode: the "LOCK" key can work together with the "power level" function and the "timer" function. Press the "blocco"

(lock) key to activate the lock function when the system is on, the word "LOCK" will appear on the remote control display. When

the lock is active the only available function is the system "ON/OFF" control. Press the "LOCK" key again for 3 seconds to

cancel the lock function. Note: after 5 minutes with no interaction with the remote control, the system will lock automatically for

safety reasons.

4.Stand-by mode: press the ON/OFF key to enter stand-by mode. Cooking will stop and after 5 minutes the system will

disconnect automatically.

5.High temperature indication function: when the porcelain stoneware surface heats up in a cooking zone, the letter "H" will

appear inside the corresponding circle on the display indicating heating, as follows:

A. During the heating process, when the surface reaches very high temperature the letter "H" will appear in continuous flashing

mode until heating is switched off and the temperature falls to an acceptable level.

B. In stand-by mode, when the surface is very hot the "H" will appear until the heat dispersed from the surface falls.

C. In off status, when the surface heats up the control knob will constantly show the "H" until the heat dispersed from the surface

decreases.

8 - SYSTEM OPERATION

1.Switching on/off: press the ON/OFF key to switch on the induction hob. The device will emit an audible signal and

simultaneously an indicator LED will light on the remote control. Now press the key for the required cooking zone to start the

cooking process. The circular symbol for the selected cooking zone will switch on. Finally, press the (+) level key to start the

system with the required power level. The selected power level will illuminate in the circle corresponding to the activated cooking

zone. If there are no pots or pans in the selected cooking zone, or if the material of which the pots and pans are made is not

compatible with the system, error "E1" will appear intermittently and the system will disconnect automatically after 60 seconds.

If the system detects a pan before the 60 seconds elapse, it will automatically start supplying power. To switch off the system,

press ON/OFF from stand-by mode or press ON/OFF twice during the cooking process.