CooKing SVIF-CK3.0 Kullanım Kılavuzu - Sayfa 15
Ocaklar CooKing SVIF-CK3.0 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CooKing SVIF-CK3.0 18 sayfaları. Induction cooker
Ayrıca CooKing SVIF-CK3.0 için: Kullanım Kılavuzu (13 sayfalar), Teknik Kılavuz (11 sayfalar), Teknik Kılavuz (10 sayfalar)
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF exposure guidelines, the distance must be
at least 20cm between the radiator and your body, and fully supported by the
operating and installation configurations of the transmitter and its antenna(s).
INSTALLATION-BUILT IN APPLICATION
Installation instructions:
1. This appliance must be installed by a authorized person as stated in the local
municipal building codes and other relevant statutory regulations.
2. Wiring connections must be in accordance with any particular conditions of the
local authority.
3. Refer to date plate for rating information. The date plate is positioned on the
bottom of the appliance.
4. Wiring should be protected against mechanical failure.
5. A means of disconnection with a contact separation of at least 3mm must be
supplied in the fixed wiring.
6. Observe all instructions for minimum clearance to any combustible surfaces.
These should be in accordance with information on the rating plate and with
national fire laws.
7. If the hob is installed near windows, proper precautions should be taken to
prevent curtains from blowing over the appliance creating a FIRE HAZARD.
8. When choosing a location for this appliance, consider availability and position of
electric supply paths.