Afag BF10 Orijinal Kullanım Talimatlarının Çevirisi - Sayfa 18
DC Sürücüler Afag BF10 için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatlarının Çevirisi indirin. Afag BF10 19 sayfaları. Bowl feeder
Sayfayı Yazdır7 Accessories
7.1 Adjusting tools
Table 7: Adjusting tools
Designation
Centering bracket
Spacer gauge
7.2 Controller
The BF is connected to the 230V/50Hz AC system via an IRG or MSG controller and can
be rated for other mains voltages and frequencies, e.g. 115V/60Hz. They operate in full-
wave mode at double mains frequency, i.e. at 50Hz AC, with a vibration frequency of 100
Hz.
Vibration displacement and thus the transport speeds are infinitely adjustable due to
magnet current and thus magnetic force variability.
Soft-starting, all IRG and MSG types can be mounted in various different ways and offer
extra controls for photoelectric barriers, initiator elements, or extern 24VDC signal. For a
detailed description of the controllers refer full-range catalogue from Afag GmbH.
Third-party controllers can also be used as long as they meet the technical requirements.
Tabelle 8: Controllers for BF
Type
Power supply
230V/50Hz
IRG1-S
115V/60Hz
230V/50Hz –
MSG801
115V/60Hz
230V/50Hz –
MSG802
115V/60Hz
Page 18
Type of drive
BF10
BF15
BF10 / BF15
Order number
Comments
50360105
Control with no timer function
External target value preset
50360106
With timer function, valve and inter-
50391818
face outputs, sensor feed
50391819
With sensor feed
2014-11-10
Order number
50076927
50076954
50185534
Release: 4.3