Austlift 103902 Kullanıcı Kılavuzu - Sayfa 7

Zincirli Vinçler Austlift 103902 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Austlift 103902 8 sayfaları. Weld on point compact

Sayfayı Yazdır
Triple weld runs may have to be conducted in
order to reach minimum weld fillet area (A).
Inspection
•
Check for bends, nicks, wear, stretching or elongation of
the components.
•
Check for any signs of corrosion.
•
Check for any scoring or cracks on all welds and components.
•
Check the latch, rivet and spring. Latch shall be working
properly.
The components should be taken out of service immediately if
it shows any of the above faults.
1300 100 120
WARNING