Cookology CET301 Kullanım Kılavuzu - Sayfa 15

Hob Cookology CET301 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cookology CET301 15 sayfaları. Built in ceramic hob

MAINTENANCE&TROUBLESHOOTING

Caution!

Before maintenance or cleaning is carried out, the cooktop should be

disconnected from the main power supply. Ensure that the cooktop is

switched off at the wall socket and the plug removed.

1.Spills and splashes will not harden and stick to the glass, as it hardly heats

up.

2.Micro crystal board surrounding should maintain clean, if have leakage to it

as soon as possible please clean.

3.Slight stains can be removed with kitchen paper or cloth.

4.More resistant stains will need specific product for vitro-ceramic glass.

Follow each product's inductions.

Important!

1.Do not use abrasive products or cleaning powders as these could scratch

the hob.

2.Do not use a steam cleaner.

3.If any cracks should appear on the surface of the glass, unplug he appliance

immediately.

4.Do not use any part of the hob until a new vitro-ceramic glass has been

installed.

Problem

Switch on the power, cooking

ring selected but not heating up.

While in use rings have

stopped heating

For a small fault please check the above table to see if it can be resolved

quickly.

After checking the fault with the table and the hob is still not working

correctly, please contact the manufacturer .

Please do not try and carry out repairs yourself.

Check and eliminate

1, Is the power cord connect

2, Please check switch, socket

and fuse is in working order

Heating safety protection,

Turn off the hob please wait

a few minutes and try again