AUSTRALIAN MADE GREAT MATE Kurulum ve Kurulum Talimatları - Sayfa 16

Motor AUSTRALIAN MADE GREAT MATE için çevrimiçi göz atın veya pdf Kurulum ve Kurulum Talimatları indirin. AUSTRALIAN MADE GREAT MATE 20 sayfaları. Double swing gate motor kit

Sayfayı Yazdır

Refer to the "DC2 Circuit Board" data sheet included with this manual and locate the Auto Close Time Set

Push Button marked 'OSC' and Dip Switch 1 and Dip Switch 8 on the circuit board.

The gate motor is supplied with the Auto Close OFF as standard.

The gate motor can be set to 'Auto Close' by simply flicking DIP switch 1 to ON, press and hold

down "OSC" button for the required time you want the gate to remain open before it auto closes,

and release the button. For example if you want the gate to remain open for 30 seconds before it

auto closes then press and hold down the "OSC" button for 30 seconds and release the button.

Once time is set flick DIP switch 1 back to OFF.

To start the Auto Close function flick DIP switch 8 to ON and leave it on. To disable the Auto

Close flick DIP switch 8 back to OFF.

Flick DIP switch 1 to ON and press

"OSC" to set the Auto Close time.

Flick back to OFF when finished.

If the 'Auto Close' feature is enabled, then precautions should be taken to

ensure the gate can close without hitting any obstructions or suitable safety

accessories are also installed.

Regularly check that all safety features and safety accessories are fully

functioning.

DC2 GATE MOTOR

INSTALLATION AND SET UP

INSTRUCTIONS

DC2 Setting Automatic Close Operation

Flick DIP switch 8 to ON to start Auto Close

or back to OFF to disable Auto Close

WARNING