COOKOUT INFINITY INF-001-SS Kullanım Kılavuzu - Sayfa 10
ızgara COOKOUT INFINITY INF-001-SS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. COOKOUT INFINITY INF-001-SS 18 sayfaları. Stainless steel gas barbecue
Sayfayı Yazdır
OPS-FRM-05.3
Propane LPG bottle installation
• Your propane LPG barbecue is supplied with a hose and regulator attached.
NOTE: If this barbecue is being connected to a reticulated propane LPG system, the hose
will need to be removed by a qualified licensed person and connected to the reticulated
system with a regulator in line.
• If a propane LPG bottle is to be stored in the enclosure under the barbecue unit, it must
be isolated from the barbecue with a non-combustible panel. The enclosure must comply
with Australian Standards AS/NZS 5601.
• If installed inside the cylinder connection system must be suitable for indoor use.
• Gas cylinders must not be more than 9kg.
• The cylinder shall not be in the same compartment as a power point or an electrical
appliance.
• Cylinder compartments shall have permanent openings ventilating directly to the
outside of the appliance, and consisting of either
a. perforations, uniformly distributed over the height of the enclosure and with a
total free area of not less than 25% of the sidewall area; or
b. separate openings at high and low level, such that
i. the total free area at high level is not less than 20,000mm2 and
ii. The total free area at low level is not less than 20,000mm2 and
Southern Stainless Pty Ltd - Artisans in Metal - Uncontrolled when printed
Infinity Grill Instruction Manual
1. At least 25% of the required area is within 15mm of the base of the
cylinder compartment
2. The total required area is within 125mm of the base of the cylinder
compartment and
3. The openings cannot be obstructed by the cylinder.
10
Revised: 2022-04-13