AUSTRALIAN MONITOR AMIS60 Kurulum ve Kullanım Kılavuzu - Sayfa 6
Mikser AUSTRALIAN MONITOR AMIS60 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. AUSTRALIAN MONITOR AMIS60 12 sayfaları. Amis installation series 60w / 120w mixer amplifier
Ayrıca AUSTRALIAN MONITOR AMIS60 için: Kullanım Kılavuzu (10 sayfalar), Veri Sayfası (2 sayfalar), Broşür (2 sayfalar)
Sayfayı Yazdır
I N S TA L L AT I O N
MOUNTING
When rack mounting, it is advisable to allow 1 rack space above and below
the amplifier. When multiple amplifiers are mounted in a rack, exhaust fans
should be used on the rack. Airflow for cooling the amplifier is by convec-
tion from bottom to top and by fan left to right.
OUTPUT
100V
70V
4 ohm
8 ohm
230/240V version
PA G E 6
AMIS SERIES 60/120 manual.indd
6
DISTANCE
Up to 50m
50m–200m
Over 200m
Up to 50m
50m–200m
Over 200m
Up to 10m
10m–30m
Over 30m
Up to 10m
10m–30m
Over 30m
115V version
Both versions
A M I S S E R I E S I N S TA L L AT I O N & O P E R AT I O N M A N U A L
OUTPUT CONNECTIONS
The output terminal strip accepts wire sizes from
16-22AWG (1.5mm2 - 0.35mm2).
The following table should be used as a guideline for cable sizes. Regula-
tions in your area may require different gauged wire and should be checked
before using.
WIRE SIZE
AMC60
AWG26(0.12mm
)
2
AWG20(0.5mm
)
2
AWG18(0.75mm
)
2
AWG24(0.2mm
)
2
AWG18(0.75mm
)
2
AWG16(1.5mm
)
2
AWG20(0.5mm
)
2
AWG16(1.5mm
)
2
Not Recommended
AWG24(0.2mm
)
2
AWG18(0.75mm
)
2
Not Recommended
NOTE: Only connect one output - either Distributed Line
or Low Impedance.
The LINE output XLR can be used to connect up to 6 booster amplifiers.
Balanced input wiring (shielded pair cable) is recommended.
NOTE: When wiring the LINE output as unbalanced, Pin2
should be wired as hot and Pin1 should be wired as
ground/shield. Do not wire Pin3.
The REC output wiring should be kept as short as possible.
INPUT CONNECTIONS
For wiring balanced in,
pin 2 is hot. Unbalanced
wiring on the microphone
inputs is not recommended.
Balanced input wiring
(shielded pair cable)
is recommended.
Unbalanced RCA wiring
should be keep as short
as possible.
AMC120
AWG24(0.2mm
)
2
AWG18(0.75mm
)
2
AWG16(1.5mm
)
2
AWG22(0.35mm
)
2
AWG16(1.5mm
)
2
AWG13(2.5mm
)
2
AWG20(0.5mm
)
2
AWG16(1.5mm
)
2
Not Recommended
AWG24(0.2mm
)
2
AWG18(0.75mm
)
2
Not Recommended
2/7/07
12:42:34 PM