AUSTRALIAN POOL EQUIPMENT PRISTINE PRI-50 Kullanıcı El Kitabı - Sayfa 10

Yüzme Havuzu Vakumu AUSTRALIAN POOL EQUIPMENT PRISTINE PRI-50 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AUSTRALIAN POOL EQUIPMENT PRISTINE PRI-50 12 sayfaları. Auto self cleaning

Sayfayı Yazdır
Use the [▲] and [▼]
buttons to select the desired
MODE of operation.
Off
No operation
On
Operates continuously at user defined output power level
Timer
Operates in relation to user defined 'Timer Settings'
SuperChlor 24 hours operation at highest possible output up to 100%
Spa
Operates with an output of 10% indefinitely
Press the [MENU] button to select the desired mode and return to the MAIN MENU.
Press the [MENU] button once more to exit the MAIN MENU and return to the MAIN
OPERATING SCREEN.

SETTING THE CHLORINE OUTPUT LEVEL

There are two ways to set the CHLORINE PUTPUT level.
You can increase or decrease the CHLORINE OUTPUT level via the MAIN
OPERATING SCREEN using the [▲] and [▼] buttons.
Alternatively, you can set the CHLORINE OUTPUT level via the MAIN MENU.
Enter the MAIN MENU by pressing
the [MENU] button. Use the [▲] and [
▼] buttons to navigate the MAIN
MENU until the arrow indicates that
you have reached CHLORINE
OUTPUT. Press the [ENTER] button
to enter the settings.
Increase or decrease the CHLORINE
OUTPUT using the [▲] and [▼]
buttons.
Press the [MENU] button to save
your changes and return to the MAIN MENU.
Press the [MENU] button once more to exit the MAIN MENU and return to
the MAIN OPERATING SCREEN.
Off
Spa
On
Timer
Superchlor
Mode Select
Chlorine Output
TimerSettings
Pump Protection
Chlorine Output:
Page 9
Press the [MENU] button once more to exit the MAIN MENU and return to the MAIN
OPERATING SCREEN.

SYSTEM INFO

Enter the MAIN MENU by pressing the [MENU] button.
Use the [▲] and [▼] buttons to navigate the MAIN MENU until the arrow indicates that
you have reached SYSTEM INFO. Press the [ENTER] button to enter the SYSTEM
INFO display screen.

Cell Cleaning

Cell Cleaning
Clock (Set Time)
Clock (Set Time)
Contrast (Adj)
Contrast (Adj)
System Info
System Info
The SYSTEM INFO screen displays system information which is mainly of use to the
manufacturer and its service agents.
Power Cycles:1
Power Cycles:1
Hour Counter:1
Hour Counter:1
Cell Polarity:+
Cell Polarity:+
Firmware Build No
Firmware Build No
POWER CYCLES
The number of times the Chlorinator has had power removed
and applied.
HOUR COUNTER
The total number of hours the Chlorinator has operated.
CELL POLARITY
The polarity at which the electrolytic cell is currently working in.
'+' is forward and '-' is reverse.
FIRMWARE BUILD NO.
Denotes the firmware revision installed into the chlorinator.
To exit the SYSTEM INFO display screen and return to the MAIN MENU press the
[MENU] button.
Page 14