4SeasonSpa Augusta 20 Kullanıcı Kılavuzu - Sayfa 5

Sıcak Küvet 4SeasonSpa Augusta 20 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4SeasonSpa Augusta 20 12 sayfaları. Easymini control box

Sayfayı Yazdır
To ensure the water in the Spa is clear and clean correct filtration (in combination with proper water treatment) is essential. We need to differentiate
two types of spa: a spa equipped with a 24 hour circulation pump and spa without this extra circulation pump.
Spa without circulation pump:
The spa is using the jet pump on low speed for filtering and heating. The Spa filter cycles should always operate for at least 2 × 2hours a day. This can
be controlled through the display (Fig. 1). Filtration starts and stops automatically.
Spa with extra circulation pump:
The spa is using the extra circulation pump for filtering and heating, this small pump is running for 24 hours a day which ensures a continuous flow in
your spa. Beside the continuous flow this spa will have some PURGE cycles as well. With a purge cycle (40 seconds) the jet pump is running on high
speed to clean the hoses and to have more water movement.
The water temperature is set at the desired level and is kept at this level through the heating system and the Spa insulation.
For proper water treatment according to local requirements please ask your dealer and check page 10.
2.1

Filter Cartridges

The Spa is equipped with 1 or 2 cartridge water filters to filter small impurities from the water. As a result the filters may become clogged, resulting
In reduced water flow. It is important to maintain a clean, unobstructed filtration system. Clean the filter cartridge every week by rinsing it with
a powerful water jet (a garden hose not a pressure washer). Our recommendation is that you renew the filter cartridges every year. Your Spa dealer will
be able to provide you with special cleaning products for your filter cartridge. Never use regular soap as it will have a detrimental effect on the water
quality in your Spa. When filter cartridges are not cleaned in time a FLO message can show up in the display.
2.2

Filtering

For filtering, we differentiate spa's with and without circulation pump.
2.2.1
Filter cycles for spa's without extra circulation pump
Each filter cycle will start with the pump running for 40 seconds on high speed. After that the pump will continue on low speed. By pressing the
button and the
and
buttons the filtration cycle can be controlled and adjusted. The duration of the cycle and the time to start the first cycle
can be selected, the subsequent cycles follow at 12 hourly intervals.
2 Water filtration & Temperature
5