4SeasonSpa Lisa 23 Kullanıcı Kılavuzu - Sayfa 6

Sıcak Küvet 4SeasonSpa Lisa 23 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4SeasonSpa Lisa 23 12 sayfaları. Easymini control box

2 Water ﬁltration & Temperature

FDx: duration of the ﬁlter cycles, FSx: time to start the ﬁlter cycle for the ﬁrst time

• FD – duration of the ﬁlter cycle

The duration of the ﬁlter cycles can be set from 0 hours (ﬁltering

disabled) to 12 hours (continuous ﬁltering) with 1 hour steps. We

recommend 2 or 3 hours each cycle.

2.2.2

Filter cycles for spa's with extra circulation pump

In this conﬁguration your spa is equipped with a 24-hour circulation pump, running all day long. To have more water movement in the spa and to clean

all hoses from the inside the spa control will start a PURGE cycles a few times a day. During each purge cycle the jet pump is running for 40 seconds

on high speed. By pressing the

6 (recommended) the spa will have each 4 hours 1 purge cycles of 40 seconds (24 hour/6=4).

Filter Boost function

This function is used to activate an accelerated ﬁlter cycle of limited duration. Pump 1 is started at high speed, and the ozone generator runs for

45 minutes. To activate the function, press and hold the

and/or addition of chemical products. The display shows the code BOO.

2.3

Water Temperature

• The display shows the current water temperature.

• By using the arrow buttons

be shown on the display for ﬁve seconds, conﬁrming the new settings, display shows

temperature.

• The water will be re-heated when the temperature has dropped 0.5 degrees Celsius.

The water temperature can be set at a value between 15 and 40 °C.

button and the

and

button for 5 seconds. This function has to be activated after intensive use of the SPA

and

you can adjust the water temperature to the desired level. The newly selected water temperature will

• FS – start up time to start the ﬁlter cycle

Now you can enter time when you wish to start the ﬁrst ﬁlter cycles.

After that the ﬁlter cycles will start with an interval of 12 hours.

buttons the purge cycle can be controlled and adjusted. When you enter a purge of

. After 5 seconds the display will again show the current