Austria Email PZR Genel Bağlantı ve Garanti Hüküm ve Koşulları - Sayfa 4
Su Isıtıcı Austria Email PZR için çevrimiçi göz atın veya pdf Genel Bağlantı ve Garanti Hüküm ve Koşulları indirin. Austria Email PZR 13 sayfaları. Layer-buffer storage tanks
Sayfayı Yazdır
OPERATIONAL CONDITIONS AND IMPORTANT INFORMATION
The device is only suitable for heating water production inside closed rooms and may only be instal-
led by authorised specialists (taking the applicable standards into account, e.g. ÖNORM B2531-1, DIN
1988). Buffer tanks are suitable for all hot water central heating systems, no matter whether solid fuel or
oil-fired boilers, heat pump, solar plant, gas or electric circulator. In addition, multiple buffer tanks can
be connected to groups. This way, the storage volume can be adjusted individually, depending on requi-
rement. Furthermore, the buffer tanks can be used also as cold water storage for cooling processes or
heat recovery in industrial plants.
The buffer tanks are only designed to operate under the conditions shown on the rating plate and with a
maximum operating pressure of 4 bar, they are also only designed for the storage of heating water.
Aside from the legally approved national regulations and standards (Austria: ÖVE, ÖNORM, etc.), the
terms and conditions of connection of the local power company and water works must be complied with,
as well as the mounting and operating instructions. The water heating must be performed in accordance
with the applicable standards (for example: ÖNORM H 5195).
The room in which the device is operated must be free of frost. The mounting of the device must be per-
formed at a location that would justifiably be taken for granted, i.e. the device must be easily accessible
in the case of any necessary maintenance, repairs or possible replacement. This means that all structural
installations impairing trouble-free work must be removed by the end user. In the case of an assembly,
mounting and operation of the water heater at unusual locations (e.g.: attics, living quarters with floors
susceptible to water, store rooms, etc.), a possible penetration of water must be taken into account, and
thus a device with an appropriate drain must be provided to collect any penetrating water, in order to
prevent secondary damages this way. The device must be assembled and operated in an arrangement
that is in accordance with the purpose and on a level surface that is suitable for the weight of the filled
water heater.
Should a device, at the point of delivery, clearly display a malfunction, damage or other defect, this must
not be fitted, installed or used in the system. Subsequent complaints regarding devices with an obvious
defect which have been connected and installed are expressly excluded under the warranty and gua-
rantee.
Caution: the buffer tank is not suitable for heating of drinking water!
SCREWED HEATING ELEMENT
In the case of some buffer tanks, a 1½" sleeve is installed, which can be used for the installation of an
electric screw-in heating element serving for additional heating or coasting of temperature. Except: Type
PZRR 1000 and 1500.
The technical concept of screwed heating elements is designed as so-called auxiliary heating, and must
not be used as permanent heating.
Id.Nr.: 237734-8
4