Agri-Fab 45-0290 Kullanıcı El Kitabı - Sayfa 8

Çim Süpürgesi Agri-Fab 45-0290 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Agri-Fab 45-0290 16 sayfaları. 38" heavy duty lawnsweeper

Sayfayı Yazdır

7. Assemble the bag retainer and the bag frame strap to

the front edge of the bag bottom. Place the bag

retainer on top and the bag frame strap underneath

the bag bottom. Fasten retainer and strap together

using six #10 x 5/8" slotted screws and #10-32 hex

lock nuts. See figure 12.

FRONT EDGE OF BAG BOTTOM

#10-32 x 5/8" SCREW

BAG RETAINER

FIGURE 12

8. Assemble the frame strap to the lower hopper tube

using two 1/4" x 1-1/4" hex bolts and 1/4" hex lock

nuts. See figure 13.

1/4" HEX

LOCK NUT

FRAME STRAP

FIGURE 13

9. Secure the bag corners over the lower hopper tube

by snapping the flap to the bag bottom on both sides.

See figure 14.

FIGURE 14

FRAME STRAP

#10-32 HEX

LOCK NUT

LOWER

HOPPER

TUBE

1/4" x 1-1/4" HEX BOLT

(OUTSIDE)

SNAP

FLAP

IMPORTANT: Do not over bend the support rods

during the following step. Over bending will cause the

spring steel rods to loose supporting tension.

10. Assemble the two hopper support rods as shown in

figure 15. Place end of rod into hole in upper hopper

tube and bend rod just enough to fit bottom end of rod

into hole in bottom hopper tube.

FIGURE 15

11. Locate (by touch) the hole in each upper hopper tube.

Pierce holes through the stitched bag flaps, aligned

with the located holes in both hopper tubes. See

figure 16.

UPPER HOPPER TUBE

FIGURE 16

SUPPORT RODS